Partition wall frames
Material:
Hot galvanized thin sheet, 1.5 mm thick, EC-primed, pale grey.
Hardware:
4 hinge pockets V8610, mortar-tight, usable L/R, prestamped lock holes with protection box, continuous seal rebate on 3 sides, without floor recess, spreader bar screwed 15 mm above bottom edge of door frame, handle height 1050 mm, metre marking both sides in the area of the pre-punched bolt holes, 3 stirrup anchors per side depending on the size of the opening, NTK seal with sealing lip, loose.
Hardware:
4 hinge pockets V8618, usable L/R, prestamped lock holes with protection box, continuous seal rebate on 3 sides, without floor recess, spreader bar screwed 15 mm above bottom edge of door frame, handle height 1050 mm, metre marking both sides in the area of the pre-punched bolt holes, 3 stirrup anchors per side depending on the size of the opening, NTK seal with sealing lip, loose.